Electric Lab Benchtop Centrifuge, LD-3 Low-Speed 4000rpm Centrifuge Machine 6 Tubes x 50ml, with Timer 0-60min and Speed Control

How to Operate1.Carefully open the top cover and place the centrifuge tube. Note: The weight of the samples placed symmetrically inside the centrifuge protection tube must be the same, and the weight deviation must not exceed 0.002 lbs.2.Open the lid and set the rotational speed to the lowest position.3.Switch on the power supply and turn the timer to the desired time value, after which the timer will start turning from the ‘0’ position and the turntable will gradually turn from low to high speed to the speed required for centrifuge operation.4.After working for a certain period, the timer returns to the “0” position, the turntable stops rotating, the centrifuge stops working, and the speed is adjusted to the lowest position.5.After the desktop electric centrifuge is used, turn off the switch, place the machine in a dry, ventilated place, and keep it clean.SpecificationMount Type: DesktopAssembly Required: No Material: Acrylic, Stainless Steel, Cold Rolled SteelProcess: Plastic SprayingColor: Blue, WhiteShape: RectangularStyle: ModernVoltage: 110V 60HzPower Source: Corded ElectricityPlug Type: US StandardRated Power: 60WSpeed: 0-4000r/minMaximum Relative Centrifugal Force: 2770xgRotor Capacity: 6*50ml/0.05 Qt.Timing: 0-60 Min or Always OnProduct Size: 28*29*25.5cm/11.02*11.41*10.03inPackage Size: 37*34*33cm/14.57*13.39*12.99inGross Weight: 9.2kg/20.28lbsNet Weight: 8.6kg/18.96lbsPackage Included1* Desktop Electric Centrifuge1* English ManualNOTE1.Please check the style and size before purchasing.2.Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included. 3.Please note that it is strictly prohibited to operate under no-load without installing the rotor. 4.Please note that if you have a single sample, please add a tube of water to realize a control experiment.5.In operation, the length and weight of the symmetrical two glass tubes (including the experimental liquid) should be equal, if the deviation is large, it will produce shaking. The disc should avoid encountering strong acids, caustics, and corrosion.6.Please note that although there is a slight vibration at speeds less than 500 rpm, it becomes smooth at speeds greater than 1,000 rpm. Quiet and vibration-free when the load is balanced, please set the timer first and then turn on the speed controller.7.Please note that when operating a desktop electric centrifuge series excitation-type motor, the brushes are usually around 500 hours and should be reversed in time so that the brush commutator does not wear out and then grind.

• 【Main Technical Indicators】Model: LD-3, Maximum speed: 4000r/min, Centrifugal force: 2770 x g, Capacity: 50ml x 6, Timing: 0-60min.
• 【Variable Speed Control】Timing control of motor speed, the clear control panel,timing by rotation button, easy to operate, spend less time.
• 【Safe and Low Noise】Dustproof cover can effectively prevent the tubes of centrifugal machine from being dirty, at the same time, it also can decrease noise made by high speed of rotor. less than 70db
• 【Fixed-angle Design】The fixed-angle design of electrical centrifugal machine has the advantage that lacks of moving parts in the rotor, it can put lower stress to the metal, which can prolong it using life time. And multiple holes for you t choose.
• 【Wide Application】Electric centrifuge is a routine laboratory centrifuge. Can be used in various fields such as biology, chemistry, food, education, beauty and so on. [If the product is damaged by logistics, please contact our customer service team. We will provide satisfactory after-sales service.]